Changzhou Betterial Film Technology Co., Ltd.

Products

PVC Card Coated Overlay Film

    • Product Name: PVC Card Coated Overlay Film
    • Chemical Name (IUPAC): Polyvinyl chloride
    • CAS No.: 39069090
    • Chemical Formula: C₂H₃Cl
    • Form/Physical State: Solid
    • Factroy Site: No. 666 Wujin East Avenue, Changzhou, Jiangsu, China
    • Price Inquiry: sales11@bouling-chem.com
    • Manufacturer: Changzhou Betterial Film Technology Co., Ltd.
    • CONTACT NOW
    VTB
    Specifications
    HS Code 220474
    Material Polyvinyl Chloride (PVC)
    Thickness 0.04 mm - 0.10 mm
    Surface Finish Glossy or Matt
    Adhesive Type Heat-activated
    Application Temperature 110°C - 130°C
    Bonding Strength High
    Lamination Method Hot lamination
    Transparency High transparency
    Protective Features Scratch-resistant, waterproof
    Application ID cards, credit cards, membership cards
    Printability Compatible with dye sublimation and offset printing
    Width 210 mm or customizable
    Length 200 meters or customizable
    Release Liner Single-side PET release film
    Storage Conditions Cool, dry place; avoid direct sunlight

    As an accredited PVC Card Coated Overlay Film factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing The packaging contains 500 sheets of PVC Card Coated Overlay Film, sealed in moisture-proof plastic and packed inside a sturdy cardboard box.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for PVC Card Coated Overlay Film: 20-foot container accommodates around 12-14 tons, securely packed on pallets.
    Shipping The PVC Card Coated Overlay Film is securely packaged to prevent damage during transit. Rolls or sheets are shipped in moisture-resistant, cushioned cartons or tubes. Standard lead times apply, and worldwide shipping options are available. All shipments include clear labeling and documentation to ensure compliance with safety and handling regulations.
    Storage PVC Card Coated Overlay Film should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, moisture, and sources of heat or ignition. Keep the film in its original packaging until use to prevent contamination and physical damage. Avoid contact with solvents or chemicals. Recommended storage temperature is between 15–25°C (59–77°F) with relative humidity below 60%.
    Shelf Life PVC Card Coated Overlay Film typically has a shelf life of 12 to 24 months when stored in cool, dry, and dark conditions.
    Application of PVC Card Coated Overlay Film

    Applications of PVC Card Coated Overlay Film in Industrial Manufacturing

    PVC card coated overlay film supports critical manufacturing lines across the secure identification, financial transaction, access management, retail loyalty, and public transit sectors. As a direct manufacturer, we supply this core lamination component to specialized card production facilities, ensuring consistent performance and compliance where long-term card durability and print integrity are mission-critical.

    1. Personal ID Card Manufacturing

    High-resolution PVC overlay films bond printed graphics and static data onto core PVC card substrates for government-issued identification cards. The overlay secures personalized inkjet, thermal transfer, or dye-sublimation prints against abrasion, exposure, and chemical attack during years of daily handling. Industrial card plants must select overlays with precisely controlled melting points, proper optical clarity, and reliable adhesive chemistry to maintain edge integrity throughout the lamination cycle, supporting chip embedding, antenna inlay, and die-cutting at high volumes.

    Industry compliance standards

    • ISO/IEC 7810:2019 (Physical characteristics)
    • ISO/IEC 24789-1 (Durability and security for ID cards)
    • National eID project technical specifications (country-specific)
    • Environmental and RoHS restrictions

    Typical usage ratio

    • Overlay film thickness typically ranges from 25μm to 50μm, accounting for 8%–15% of total laminated card thickness. Adjusted based on target card rigidity and security feature integration.

    Downstream process integration

    • Laminated onto pre-printed PVC card sheets using hot roll or plate lamination at 110–145°C; positioned as the final layer above printed graphic panels or security feature inlays, followed by cooling and die-cutting to individual card size.

    Final product types

    • National ID cards
    • Resident permits
    • Driver’s licenses
    • Voter registration cards

    2. Bank Card and Payment Card Production

    Overlay films in payment card manufacturing protect personalized graphics, sensitive cardholder data, and EMV module areas against wear, UV, and tampering. Card bureaus utilize overlays with enhanced adhesive properties and anti-scratch coatings for high-speed lamination lines. They must maintain dimensional tolerance and register with both the chip window and hologram areas, while ensuring compliance with payment scheme specifications in terms of appearance and durability testing under simulated usage conditions (e.g., bending, chemical immersion, and thermal cycling).

    Industry compliance standards

    • Mastercard Card Quality Management (CQM)
    • Visa Card Quality Requirements (CQR)
    • ISO/IEC 7816 (Integrated circuit cards)
    • PCI Physical Security Requirements

    Typical usage ratio

    • Overlay thickness generally 35μm–50μm (10%–16% of overall card platform); determined by total card stack-up with EMV module and customization method (embossed, flat-printed, or printed chip cards).

    Downstream process integration

    • Laminated as the topmost layer over the printed core and security label layer during high-pressure, short-cycle lamination (typically 140–150°C, 7–10 minutes per stack); adapted for compatibility with laser engraving or hot-stamping post-processes.

    Final product types

    • Credit cards
    • Debit cards
    • Prepaid cards
    • Contactless payment cards (NFC/MIFARE)

    3. Access Control and Security Badge Manufacturing

    Corporate and institutional access card issuers utilize overlay films to encapsulate protection across magnetic stripe, RFID, and smart card platforms. In these production lines, the overlay serves to shield embedded electronic elements against delamination under repeated bending and reader usage. Each overlay must mate precisely to proximity antenna windows and optical clarity zones for security features, with performance validated under ISO bending and environmental stress protocols. Enhanced print anchorage and laser personalization accept multiple personalization options according to client system requirements.

    Industry compliance standards

    • ISO/IEC 14443 (Contactless smart cards)
    • ISO/IEC 15693 (Vicinity cards)
    • ANSI/BICSI 007 (Physical security)
    • UL 294 (Access control system units)

    Typical usage ratio

    • Typical addition: 30μm–40μm overlay (7%–12% of multilayer card thickness); fine-tuned to electronic inlay thickness and wear resistance demands of site-specific environments.

    Downstream process integration

    • Applied after RFID chip and antenna embedding, before high-pressure lamination, then punched to final card shapes and slot-punched as per access system protocol; sometimes followed with UV-cured topcoats if required.

    Final product types

    • Employee ID badges
    • RFID access cards
    • Magstripe entry badges
    • Facility visitor passes

    4. Retail Loyalty Card and Gift Card Production

    Loyalty and prepaid card producers rely on coated overlay films to protect intricate branding, QR/barcode data, and variable personalization from abrasion, solvent exposure, and everyday handling. Retail-focused card programs may further demand overlays compatible with thermal rewritability or optical feature integration (e.g., holographic stripes, signature panels). Manufacturers customize overlay thickness and finish—matte, glossy, or holographic—to brand standards and in-store reader type, while cloud-based QC enables batch traceability end-to-end.

    Industry compliance standards

    • ISO/IEC 7810 (Physical characteristics)
    • CQM retailer program QA
    • REACH (for restricted substances)
    • RoHS and WEEE for material composition

    Typical usage ratio

    • Composition: 25μm–35μm (8%–11% of classic retail card thickness), tailored for branding requirements, printer compatibility, and erasure resistance during swiping/scanning.

    Downstream process integration

    • Integrated after variable data imaging, before lamination with magnetic tape or barcode overlays, then precision cut and collated for personalized packaging in retail batches.

    Final product types

    • Loyalty member cards
    • Gift cards
    • Prepaid phone/recharge cards
    • Store-issued membership credentials

    5. Public Transportation and Fare Card Lamination

    Urban transportation card systems demand overlay films with enhanced friction and weather resistance, preserving security print fidelity throughout high-frequency contact or contactless terminal use. Overlays must pass transit authority abrasion, flex, and environmental cycling tests, and enable bonding above or below the antenna inlay without interfering with RF performance. Heat stability and clarity support machine readability, while anti-fog or anti-glare treatments can help in high-traffic, outdoor service areas.

    Industry compliance standards

    • ISO/IEC 14443 (Transit card communication)
    • EN 1545 (Automated fare collection cards)
    • Transit authority specification sheets (e.g., MTA, Transport for London)
    • Material fire safety (EN45545-2 for public transport)

    Typical usage ratio

    • Layer thickness: 30μm–45μm (8%–14% of transit card), set by daily flex and bending benchmark tests and exposure projections over product service life.

    Downstream process integration

    • Applied after digital offset or screen-printing of variable data and before mounting RFID or chip inlays; laminated, die-cut, and stacked for batch delivery to transit authority or ticketing bureaus.

    Final product types

    • Metro cards
    • Bus and tram contactless cards
    • Train season ticket cards
    • Fare media for city mobility apps (physical cards)
    Free Quote

    Competitive PVC Card Coated Overlay Film prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618105193818 or mail to sales11@bouling-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618105193818

    Email: sales11@bouling-chem.com

    Inquiry

    Get Free Quote of Changzhou Betterial Film Technology Co., Ltd.

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    PVC Card Coated Overlay Film: Why In-House Film Manufacturing Matters

    From Raw Material to Finished Sheet—A Story About Control and Consistency

    Patience pays off when aiming for the kind of overlay film that really lets a card stand up to the beating it takes every day. In our experience, starting from raw vinyl resin and compounding all the way to the final coated product, each stage asks for a watchful eye and years of working with the material. To us, making PVC card coated overlay film is more about control than automation. Yes, we’ve brought in new lines and invested in better temperature controls, but it’s what we notice at the roller face—what the operators touch and test, what the formulation chemists see when a batch looks different—that keeps our overlays durable and easy to bond.

    Overlay, Adhesion, and the Puzzle of Lamination

    Most people don’t think much about the film that sits on the front and back of their bank card or metro pass. After decades of supplying the PVC card industry, we can say with certainty that the overlay’s impact on life cycle and image quality matters much more than it appears. The point of this film is to create a durable, printable, and tamper-resistant protective layer. Our coated overlay models, often in thicknesses between 30 and 100 microns, offer the right balance of clarity and toughness. This protects the printed core and makes sure the card survives tens of thousands of swipes.

    PVC is an old material, yet it still outperforms many alternatives for price and processability. But overlay film isn’t just plain PVC anymore. Our overlays are coated with a specialized adhesive surface, tailored to bond securely with PVC or PET-G base cards in standard lamination presses. This surface ensures the printed image on the card core fuses perfectly with the overlay—no bubbling, clouding, or early delamination. In the late nineties, many card makers struggled with films that left the print looking dull or peeling after a few months. Since we control our own recipe down to the blend of plasticizers and stabilizers, our formulations prevent these common field failures.

    Measuring Success by Customer Complaints—Or the Lack of Them

    Feedback comes fastest from card producers when something goes wrong. We know that a streak across the overlay or a haze after lamination spells rework or lost contracts. In the last several years, as chip and antenna embedding became common, the bar for film performance has risen. The overlay must not only protect the print and card structure; it must also handle the heat and pressure of lamination—often more than once as new modules are added. Recently, one client pushed our films through a 160°C lamination with printed electronics. They reported zero delamination, superior print clarity, and fewer rejects than any competitive film they’d used before. These results only come with consistency in base resin sourcing, tight process controls during calendaring, and experienced operators.

    A Closer Look: Model, Thickness, and Coating

    Card overlays vary in thickness and coating according to their use. For general-purpose cards like loyalty or gift cards, we run a 50-micron model with a thermal-activated adhesive coating. On the other end, national ID and driver’s license manufacturers order 100-micron overlays, which resist tampering and enable laser personalization without peeling or distortion. Our pilot line was one of the first in Asia to switch adhesives from solvent-only to greener, water-dispersed types. The move cut emissions and made handling safer for our operators. We’ve maintained the adhesive’s bond strength by tweaking resin blends and curing curves—a result of hundreds of iterations and in-house pull tests.

    Thickness tolerance makes a difference. A sheet that comes in 5 or 10 microns off spec leads to pressure ripples, incomplete bonding, or wasted sheets in automated production. At full scale, tight thickness distribution is no theory—it’s a pledge we’ve made, underscored by weekly calibration and regular sample checks. Our experience says rejection rates fall below one percent, a level that helps large card producers keep their lines running and their partners happy.

    Why Not Plain PVC or Other Films?

    Some ask why they can’t use uncoated PVC sheets from a standard supplier, or even mix overlays meant for packaging into card production. This shortcut almost always backfires. Regular PVC lacks the surface chemistry for lasting adhesion, leading to cards that peel in wallets or fade in sunlight. Irregular surface tension creates print defects, and inferior weathering wipes out readability after just a few months. We also see growing confusion with PET or polycarbonate overlay films. For certain government and long-life security cards, PET and PC are indeed stronger choices, but their lamination windows and ink compatibility differ sharply from PVC. Our coated overlays slot easily into standard PVC card presses and ink systems. Most high-speed card lines already set their temperature and dwell profiles for our material, and operators notice the glossy, lint-free finish that cuts down on static or jamming.

    Security Features—Making Overlay Part of Card Protection

    Overlay film isn’t only about durability and print clarity. Many clients now demand extra security in the overlay itself. We offer colored, UV-reactive, and hologram-embedded overlays developed in-house—never farmed out and never generic. During R&D, our team discovered that certain pigment and adhesive combinations deliver both strong lamination and finished cards that pass machine readability checks. One challenge: keeping security features crisp without sacrificing strength. Our solution hinges on precision extrusion and a five-zone coating unit that meters the adhesive and pigment to less than a micron. Every batch undergoes scratch, chemical, and environmental stress testing—no part of the process is left unchecked. Some overlays even carry our proprietary signature, enabling downstream authentication by card issuers.

    Sustainability—Steps Beyond Green Slogans

    PVC as a base material has drawn criticism due to environmental concerns. In the past, waste film piled up and offcuts became troublesome to manage. Over the last decade, we’ve directed much of our resources to real waste solutions—from in-line recycling systems to post-industrial solvent recovery units. Our coated overlays contain over 10% recycled content with no loss in clarity or bond strength, verified by third-party audits. Even small modifications, like replacing certain plasticizers with bio-based alternatives, have a real effect. One insight: keeping the coating process closed-loop yields cleaner air and controls dust, which reduces operator complaints and improves product yield. Each overlay roll that ships out reflects our belief that innovation and responsibility aren’t opposites—they’re where good manufacturing begins.

    How the Card World Drives Us to Improve

    No one in the industry stands still. Just a few years ago, the focus was only on run speed and price per kilogram. These days, card issuers talk about color stability, ease of personalization, compatibility with digital and laser printers, longer card life, and global compliance. New ID and banking programs arrive each month, and every customer provides feedback—good and bad—within weeks. That’s a motivator. Our chemists now tune each batch of coating for cards printed with the next generation of inks, and production teams tweak machines to handle thinner and more intricate overlays. The learning curve never flattens, but neither does our commitment to fixing a problem when it happens instead of waiting for an outside lab to send a result.

    Real Challenges in an Automated Era

    Automation brings higher output and tighter tolerance, but it doesn’t solve every challenge. Sensors and inline cameras can pick up voids or inclusions, but only experienced technicians sense a subtle change in resin viscosity or odor. A chemical manufacturer who understands these cues and encourages line operators to slow down or call a halt saves more material over a year than any investment in new vision equipment. Sometimes, a batch shows minor streaks or an off-shade tint—rejecting, reworking, or blending such material takes experience and real responsibility. We rarely talk about these everyday decisions on glossy datasheets, but that's where long-term trust is built.

    Comparisons with Other Overlay Films

    Many overlay films saturate the market, from solvent-coated PET to UV-lacquered PC. Having handled both, there are tradeoffs. Solvent-coated polyester overlays tend to offer higher temperature resistance and better oxygen barrier properties. In cost-sensitive and mass-market card runs, though, PVC coated overlay maintains competitive bond strength, easier processing, and less static—reducing both curling and sheet misfeeds. Polycarbonate overlays, often found in government and secure IDs, excel for anti-counterfeit elements but require twice the investment in press retrofits and longer lamination cycles. Our customers who test these alternatives invariably return for our PVC overlay when cost, speed, and legacy system compatibility matter.

    Another distinction shows up under foil or metallic ink. Some overlays dull metallic finishes or introduce haze because of incompatible surface tension. A reliable coated PVC overlay offers almost mirror-like clarity and holds foils securely, scoring high in both bend and peel tests in real labs. Our technicians spend months each year analyzing competitive overseas films in side-by-side processing trials. The most common feedback we hear: “Fewer jammed sheets. Less dust. Fewer reworks.”

    Supply Chain: Why Coated Overlay Starts with Local Inputs

    In turbulent market years, steady supply of base resin and additives safeguards both quality and delivery timelines. Our operation sources the bulk of its vinyl resin from regional producers who supply us directly, without unnecessary layers. By cutting out mid-stream mixing or relabeling, we’ve kept grades consistent and minimized off-grade shipments. Production scheduling adapts to real patterns, letting us quickly prioritize high-demand models or urgent pilot orders from new customers. Our partners ask for transparency—so we share batch history and technical notes willingly.

    Every client, from public transport card makers to secure government printers, knows problems must be solved locally. In our plant, we stock multiple grades of both base PVC and coated overlays, and can change runs within a shift to fill emergencies. Recent disruptions, from ports to raw material prices, impact the whole world. Maintaining both raw resin, stabilizers, and finished stock onsite cuts weeks out of the supply chain, especially for high-volume, time-sensitive customers.

    The Human Element—Why Experience Still Defines Quality

    Everyone asks about machinery, test equipment, and process analytics, but what sets our PVC card overlay apart is the experience of the operators and chemists who have worked with the material for decades. Every production shift starts with hands-on checks—taking a sample, stretching a test piece, and passing it under ultraviolet. These steps flag early any possible adhesion, clarity, or shrinkage problem. During scale-up of each new product, operators log line speeds, fume levels, and tension settings. Real learning comes from fixing a line that won’t run as planned, or redoing a batch until every meter laminates smoothly.

    Mistakes are costly, and nothing teaches faster. We have learned to listen more than we talk—feedback from press operators at customer sites, and observations from packers and finishers, have prompted line upgrades and recipe fine-tuning many times. Overlay performance isn’t set just by the compounding of the resin or adhesive; it’s the sum of hundreds of judgment calls at each stage. We keep our doors open to site visits and audits and welcome requests for small-lot, custom overlays. The shared knowledge between our team and customers delivers better cards and fewer surprises.

    End-Use Reliability—From Large Scale to One-Off Runs

    Card overlay needs shift as end-users move from big bank orders to nimble, short-run or personalized printing shops. Some of our oldest clients still make magnetic stripe cards in batches of a million, while new types of customers demand overlays suitable for one-off printing, often requiring special adhesives or custom thicknesses. Our R&D cycle is shorter than most—enabling us to run a prototype and scale up within weeks. Loyalty, prepaid, healthcare, student ID, and transport card clients each use overlays differently. Listening to these differences, and visiting their lines, has given us insight on the sticking points, from coated film’s feeding in small-format lamination presses to compatibility with evolving printer models.

    A production line that runs for years without stopping is great, but if it can’t adapt to emergency jobs or last-minute changes in card style, it isn’t serving the industry well. We’ve built changeovers and quick cleaning into our lines; our team can move from one overlay type to another with less downtime than most. Satisfying both high-volume and custom order clients depends not on having more capacity, but the willingness to fine-tune small variations, make a second pass if clarity doesn’t meet spec, or run extra adhesion checks before shipping.

    Looking Forward—The Jobs and Skills We Still Need

    As technology and card standards evolve, raw chemical knowledge and manufacturing skill keep overlay film at the required level of reliability. In the future, more overlays will include micro-print, optically variable inks, or embedded features. Making these complex overlays requires not only new raw materials, but real awareness of how each adjustment will affect lamination, card printability, and product stability. We recruit for experience—operators who have a feel for heated rollers, and chemists who can read a solution’s castability from a handful of test flakes. Structure and process documentation help, but nothing replaces the steady hands and eyes of those who have made thousands of rolls and solved countless small problems before each shipment goes out.

    Customers count on us for frank advice. When a new print process or compliance code comes down the line, we offer guidance that grows from experience, not theory. Our overlays support cards that cross borders into dozens of regulatory environments, including ISO banking requirements and tough government database integration. We view these challenges as necessary drivers for improvement. Manufacturing coated overlay isn’t just about buying machines and running lines faster; it’s hands-on craft and judgment at scale.

    In Summary—Why Direct Manufacturing Counts in PVC Overlays

    The difference between a private label overlay and one straight from the manufacturer often shows up not in a data sheet, but on a busy card line. Our approach, from compounding PVC resin to final adhesive coating, ensures consistently high bond strength, image clarity, and predictable lamination every time. Serving end-users—from government ID makers to retail card printers—has shaped countless design tweaks, adhesive improvements, and sanity checks that give our overlays their reputation in the field. Real results, real improvement, and real trust—this sums up the story of our coated PVC card overlay film.

    Changzhou Betterial Film Technology Co., Ltd.

    Need Quality Chemicals You Can Trust?

    Get in touch with our team to discuss your chemical product requirements, request samples, or explore how we can support your business with tailored solutions.