| HS Code | 314426 |
| Product Name | Triallyl Isocyanurate |
| Abbreviation | TAIC |
| Chemical Formula | C12H15N3O3 |
| Molecular Weight | 249.27 g/mol |
| Cas Number | 1025-15-6 |
| Appearance | Colorless or pale yellow liquid or crystals |
| Melting Point | 23-27°C |
| Boiling Point | 220°C at 15 mmHg |
| Solubility | Insoluble in water, soluble in organic solvents |
| Density | 1.184 g/cm³ at 25°C |
| Flash Point | 145°C |
| Main Uses | Crosslinking agent for polymers and elastomers |
| Purity | Typically ≥99% |
| Odor | Faint characteristic odor |
| Storage Conditions | Store in cool, dry, well-ventilated place |
As an accredited Triallyl Isocyanurate (TAIC) Crosslinking Agent factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Triallyl Isocyanurate (TAIC) Crosslinking Agent is packaged in sealed 25 kg fiber drums with inner polyethylene liner for moisture protection. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for Triallyl Isocyanurate (TAIC) Crosslinking Agent: 16 Metric Tons (MT) per 20-foot container, typically packed in 25 kg bags. |
| Shipping | Triallyl Isocyanurate (TAIC) Crosslinking Agent is shipped in tightly sealed, corrosion-resistant containers, typically drums or IBCs, to prevent leakage and moisture exposure. Packages are clearly labeled as hazardous. During transit, secure handling is essential, following local and international chemical transport regulations to ensure safety and product integrity. |
| Storage | Triallyl Isocyanurate (TAIC) Crosslinking Agent should be stored in a cool, dry, and well-ventilated area away from direct sunlight, heat sources, and ignition points. Keep containers tightly closed and avoid moisture contact. Store separately from acids, oxidizing agents, and strong bases. Proper labeling and secondary containment are recommended to prevent leaks and environmental contamination. Handle with appropriate personal protective equipment. |
| Shelf Life | Triallyl Isocyanurate (TAIC) crosslinking agent typically has a shelf life of 12 months when stored in cool, dry conditions. |
Our facility produces high-purity Triallyl Isocyanurate (TAIC) for integration into demanding downstream processes, serving as a reactive crosslinking agent in several high-technology sectors. Thanks to its structural properties, TAIC enables manufacturers to elevate end-use performance across polymer, electronic, and photovoltaic supply chains. Below, we detail key, verifiable application scenarios with explicit process, compliance, and product details based on established industrial use.
TAIC plays a critical role in the crosslinking of polyolefin-based insulation used for power cables, automotive wires, and communication cables. When compounded with polyethylene (XLPE) or ethylene-vinyl acetate (EVA), TAIC enhances heat resistance, mechanical stability, and electrical insulation properties, ensuring that insulation materials remain durable under continuous electrical load and elevated temperatures. The additive enters formulations prior to pelletizing and subsequent extrusion processes, tightly integrating with polymer chains during irradiation or peroxide-initiated curing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
In photovoltaic (PV) module manufacturing, TAIC acts as a crosslinking coagent in the formulation of ethylene-vinyl acetate (EVA) encapsulant films, crucial for solar cell lamination. Its inclusion ensures fine control over the gel content, transparency, and thermal aging performance that module producers require for extended outdoor service life. The material integrates stepwise—first in film compounding, then as part of the lamination process under heat and pressure, improving the encapsulant’s adhesion and resistance to yellowing or delamination.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Thermoplastic manufacturers incorporate TAIC as a crosslinking coagent to enhance performance attributes in engineering plastic systems such as polyamides, polyesters (PET/PBT), and thermoplastic elastomers. It provides improved chemical resistance, dimensional stability, and stress crack resistance after irradiation processing. The additive enters the process at the masterbatch or direct compounding stage, ensuring uniform distribution before molding or extrusion of complex profiles and technical parts subjected to post-molding irradiation.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Rubber processors use TAIC in peroxide-cured elastomer systems to accelerate vulcanization and boost heat resistance, elasticity retention, and compression set performance, especially in fluoroelastomer (FKM), ethylene-propylene-diene rubber (EPDM), and chlorinated rubber formulations. The agent is premixed into gum stocks and co-reacts with peroxides during the press-curing or injection-molding steps, producing vulcanizates with low migration and improved mechanical integrity for advanced sealing and gasket applications.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
TAIC finds essential use in the formulation of epoxy and unsaturated polyester resin systems, serving as a crosslinker to optimize the thermal and dielectric properties in electronic potting compounds and encapsulant materials for semiconductors and circuit board protection. Integrated during the resin blending phase, the additive delivers stability against high-temperature stress and electrical tracking, supporting the durability needed for miniaturized modern electronics subjected to cyclical processing conditions.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
TAIC is utilized in the crosslinking of closed-cell polyethylene foam products, which require tailored density, resilience, and dimensional stability in packaging, automotive, and building insulation. Added during the melt compounding phase, it serves as a reactive crosslinker activated during post-extrusion irradiation, allowing foam producers to control gel fraction and achieve tough, compression-resistant foam structures with high thermal insulation values.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive Triallyl Isocyanurate (TAIC) Crosslinking Agent prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618105193818 or mail to sales11@bouling-chem.com.
We will respond to you as soon as possible.
Tel: +8618105193818
Email: sales11@bouling-chem.com
Flexible payment, competitive price, premium service - Inquire now!
In the world of polymer processing and specialty additives, Triallyl Isocyanurate—known to many simply as TAIC—draws attention for its reliability in achieving effective crosslinking. Sitting on this side of the vat, where process meets product, brings a close understanding of why seasoned manufacturers keep returning to TAIC and what truly distinguishes it in a market filled with choices like trimethylolpropane trimethacrylate (TMPTMA) or dicumyl peroxide (DCP). Our facility isn’t just a handler of raw materials; we’re engaged daily in transforming, testing, and using the very product we send out. These experiences highlight what stands out with TAIC and why certain features—often dismissed as mere details—carry outsized significance for real-world applications.
TAIC comes off our reactors as a colorless to slightly yellowish liquid or crystalline solid. Standard models such as TAIC-99 represent a purity minimum of 99%, which translates to cleaner processing, less by-product formation, and predictable end results in crosslinking. In practical terms, higher purity means less downtime for cleaning and fewer rejected batches. Bulk density and melting point don’t just fill datasheets—they matter when you feed materials into automated compounding lines or calibrate dosing units for extrusion. TAIC’s melting range sits around 23 to 27 degrees Celsius. Solid TAIC flows easily once it warms to room temperature, neatly suiting powder blends and pellet-form systems where uniform distribution is needed within a short mixing window. On the factory floor, the ease of handling TAIC can save hours of frustrated troubleshooting, whether for cable insulation, pipes, or high-temperature plastic parts.
Years of production runs reveal why crosslinking agents are so often a choke point or a lifeline for quality. Take polyethylene insulation for underground cables: a small variation in crosslinking can decide whether a batch passes or fails. TAIC supports electron beam and peroxide crosslinking processes. Operators prefer it because the reaction window stays consistent and product properties stay predictable. With TAIC, we see tighter control over gel content and reliable resistance to heat aging. This makes a noticeable difference in final product performance—insulation that stays robust, pipes that don’t crack under thermal cycling, automotive wire harnesses that avoid premature brittleness. When processing PVC for heat-resistance, TAIC’s trifunctional allylic groups allow a tighter network formation without significantly compromising material flexibility.
Rubber processing lines have their own story. Crosslinking agents often make or break the production rate and product shelf life. Peroxide curing with TAIC lets rubber grades reach higher tensile strength and elongation, thanks to a three-armed structure that builds a sturdy molecular net. TAIC doesn’t just drive up yields; it opens up product lines like heat-shrinkable tubes, high-performance O-rings, and automotive hoses.
Working through batches of TAIC, TMPTMA, and DCP side-by-side uncovers clear distinctions. TAIC does not introduce odor issues, a common headache with aromatic peroxides. In flexible PVC, TMPTMA can cause unwanted plasticizer migration. TAIC avoids these complications thanks to a balanced molecular size and a lack of pendent functional groups that can leach. Comparing levels of scorch safety, TAIC grants a much wider process window in peroxide-cured compounds, reducing scrap due to premature curing or inconsistent mixing. For cable manufacturers, this spells lower risk and improved product reliability.
Cost also matters. TAIC may run a bit higher on the raw material invoice, but the reduction in processing waste and failed batches more than offsets this. In polymer blends exposed to electron beam curing, TAIC consistently yields a finer, more uniform crosslinked structure, with fewer issues tied to hot spots or incomplete reactions.
In our plants, TAIC’s influence appears every day. Blending it with low-density polyethylene before extrusion of cable insulation gives more stable gel content readings—so the product meets tight certification standards. For automotive hoses, the improved thermal and chemical resistance meant we tightened our quality control limits, increased line speeds, and responded to fewer customer complaints about early aging or cracking.
In thermoset molding, TAIC handles pressure and temperature swings. Press operators have commented on better mold release and fewer surface defects. In compounds where fillers run high, it helps maintain throughput, avoiding the stickiness or plate-out that disrupts commercial schedules. From compounding to final inspection, these details help explain why TAIC stays in our toolkit.
Market dynamics shift often—feedstock prices fluctuate, and downstream industries present new demands. Reliable access to consistent-grade TAIC has grown critical where certification and repeatability can sink or lift customer relationships. Our decades of investment in reactor technology, purification, and in-line quality analytics support uninterrupted supply and enable us to back trace every shipment. For customers facing regulatory changes or innovation cycles (like the shift to flame-retardant insulation without halogens), TAIC gives a bridge to meet both safety and technical standards.
TAIC continues to carve a space in polymer upcycling too, by helping recycled polyolefins regain lost mechanical properties. This points to more than just compliance. Producers working to create closed-loop or partially recycled PE films turn out better results with finely tuned TAIC content, achieving elasticity and tensile strength that rival virgin-grade materials.
No chemical is perfect—a truth that emerges at scale. TAIC, for all its performance, shows sensitivity to moisture and light. Storage tanks stay inerted and shielded from UV. Teams weigh and transport TAIC with moisture control in mind, since unintended exposure can result in batch variation or slower mixing. Some operators have tried lower-purity alternatives, finding that trace contaminants led to yellowing or inconsistent curing in finished product, which then meant expensive rework or customer claims. After these lessons, demand for high-purity, tightly-controlled TAIC has only grown.
Worker health stands as another consideration. While TAIC does not bring the same acute hazards as many aromatic crosslinkers, proper PPE is a must. Routine monitoring for vapors—especially during high-temperature blending—ensures compliance with workplace exposure limits and prevents incidents before they happen. Ongoing dialogue between plant safety officials and production staff keeps these safeguards well-matched to actual workplace conditions.
Customer requirements rarely sit still. What started as a push for tougher, more heat-resistant plastics turned into calls for clarity in UV-curable coatings, better dielectric properties for 5G infrastructure, and higher yields in extrusion for food-safe packaging. TAIC’s trifunctional allyl backbone supports efficient crosslink formation in electron beam, gamma, or chemical curing environments, making it a favorite for quickly adapting to new technical challenges on production lines.
Our technical teams worked alongside cable firms looking to meet both RoHS and REACH regulations, providing TAIC for halogen-free compounds. Adjusting dosage and refining grind size improved both throughput and the key electrical properties the industry needed. For those shifting toward renewable energy applications, TAIC helped meet the higher weathering and mechanical demands for PV cable insulation.
In elastomer production, demand for cleaner, high-performance O-rings for semiconductor or medical sectors led our R&D teams to refine purification further. Removing trace antioxidants and residual monomers gave rubber blends a lower outgassing profile, meeting stringent end-user tests for cleanliness and stability.
Practical testing underpins every shift in our production protocol. Pilot extruders run side-by-side comparisons between TAIC and alternative crosslinkers, validating tensile strength, elongation at break, and accelerated aging profiles. Consistent results inform real changes to customer formulations. Out in the field, contractors have returned with feedback echoing what lab data already showed: insulation and jacketing lines using TAIC exhibit lower rates of stress cracking after installation—vital when infrastructure investments run into the millions.
Laboratory work only speaks so loudly without field validation. Service calls after initial rollouts confirmed improved durability, while competitors relying on less compatible crosslinkers dealt with warranty returns and damaged reputations. TAIC’s contribution to lower failure rates isn’t just about technical testing; it’s about a feedback loop between production, application, and consistent use in the hands of people building critical systems.
With regulatory pressure growing, especially for greener chemistries, TAIC stands up well for its robust crosslinking and modest residual emissions under recommended use. End-of-life disposal and recycling for crosslinked materials remain a challenge because traditional crosslinkers often create thermoset networks that resist reprocessing. To support circular solutions, research projects in our group focus on incorporating TAIC into blends that enable dynamic crosslinks, so reclaimed materials can soften and reform under certain conditions. While still early-stage, these efforts promise a path toward doing more with less—cutting waste and boosting value from every shipment.
Reducing handling risks counts as another practical need. Integrating TAIC into masterbatches reduces dust and operator exposure during compounding, and gives more flexibility during scale-ups. As automation expands across manufacturing, our engineering teams adapted dosing systems to handle TAIC in different forms—granular, solid, or liquid—keeping process safety and consistency as core priorities.
Direct exchange with customers, from bulk polymer plants to small-batch custom compounding shops, shapes every tweak in our process. In-house analytics, hands-on technical support, and field visits underline each lesson learned. Higher shear mixing, better temperature control, and process tweaks cut down on both energy usage and product variability. Process improvements draw from practical challenges shared by end users, keeping product development focused on what matters most: reliability, safety, and performance that holds up under pressure.
We’ve seen new demands appear swiftly. Electric vehicle OEMs want cable insulations with higher voltage endurance. Packaging groups seek lower migration in polymer films for food contact. Each shift brings operational questions about reactivity, compatibility, and safe handling. TAIC has held firm as a solution for many—proven both by numbers in the lab and the stories of production teams working through tight schedules and unforgiving conditions.
From the viewpoint of hands-on chemical manufacturing, TAIC offers a distinctive blend of reactivity, ease of handling, and broad application benefits. The gap between an inert datasheet and practical production shrinks only through repeated experience—batch after batch, year after year. Listening to users, testing in real time, and responding fast to factory-floor realities have shaped the TAIC story far more than sales slogans or marketing hype. Whether rolling out new polymer grades, hitting evolving regulatory standards, or helping customers solve day-to-day production headaches, direct manufacturing experience gives meaning and value to the product. For everyone from process engineers fine-tuning their lines to end-users counting on durable, high-performing materials, TAIC’s strengths come out most vividly where it matters—in daily use, with real people making real products.
Get in touch with our team to discuss your chemical product requirements, request samples, or explore how we can support your business with tailored solutions.