| HS Code | 800899 |
| Chemical Name | 2-Hydroxy-4-n-octyloxybenzophenone |
| Cas Number | 1843-05-6 |
| Molecular Formula | C21H26O3 |
| Appearance | Light yellow powder or granule |
| Molecular Weight | 326.43 g/mol |
| Melting Point | 47-49°C |
| Boiling Point | 210°C (at 2 mmHg) |
| Solubility | Insoluble in water, soluble in organic solvents |
| Assay | ≥98% |
| Absorption Maximum | 287 nm |
As an accredited UV Absorber UV-531 (RIASORB UV 531) factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | UV Absorber UV-531 (RIASORB UV 531) is packaged in a 25 kg fiber drum with a plastic inner lining for protection. |
| Container Loading (20′ FCL) | 20′ FCL can load about 10MT of UV Absorber UV-531 (RIASORB UV 531), typically packed in 25kg fiber drums. |
| Shipping | UV Absorber UV-531 (RIASORB UV 531) is typically shipped in sealed fiber drums, cartons, or plastic bags with an inner lining, each containing 25 kg. The product should be stored and transported in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and moisture to maintain stability. |
| Storage | UV Absorber UV-531 (RIASORB UV 531) should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and incompatible materials such as strong oxidizers. Keep the container tightly closed when not in use to prevent contamination and moisture absorption. Store in original, labeled containers and avoid prolonged exposure to air and humidity. |
| Shelf Life | Shelf life of UV Absorber UV-531 (RIASORB UV 531) is typically 24 months when stored in a cool, dry place. |
UV-531 plays an essential role in protecting polymer-based, coatings, adhesive, and elastomer systems from photodegradation. As the direct manufacturer, we supply UV-531 to downstream industries requiring durable UV stabilization. Below, we detail actual industrial scenarios, supported by regulatory guidelines, precise dosage ranges, and integration points, as verified by major regulatory and trade associations worldwide.
Polyolefin processors incorporate UV-531 during the compounding phase to prevent degradation and loss of mechanical properties in outdoor applications such as films, agricultural plastics, and molded parts. UV-531 offers reliable protection against discoloration and embrittlement caused by prolonged UV exposure. Leading film manufacturers routinely blend it with other stabilizers to meet product lifespan requirements for both industrial and consumer-use markets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Automotive OEM and refinish coatings utilize UV-531 within the resin system to improve gloss retention and minimize yellowing and chalking under exterior sunlight exposure. During paint manufacturing, formulators select UV-531 for alkyd, acrylic, and polyurethane systems, balancing lightfastness and weathering standards expected in automotive applications. When paired with hindered amine light stabilizers (HALS), UV-531 helps extend coating lifecycle on vehicle exteriors, chassis parts, and plastic trim.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Polyurethane processors introduce UV-531 to increase outdoor service life in both rigid and flexible PU grades, addressing degradation that leads to yellowing, mechanical failure, and surface cracking. The additive is mixed into the polyol or prepolymer prior to final cure, ensuring uniform UV stabilization in finished insulation panels, elastomeric wheels, or seating foams. The UV absorber supports high compliance needs in construction and transport applications requiring reliable weather resistance.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Formulations of synthetic adhesives and sealants blend UV-531 to stabilize the polymer matrix–especially in silyl, polyurethane, and acrylic-based products intended for exterior and high-UV environments. Construction and automotive assembly producers use the additive to prevent loss of adhesion, surface crazing, and yellowing, delivering products that satisfy durability claims over extended life cycles. Specific grades have compatibility certification with leading elastomer-modified adhesives, particularly for curtain wall, glazing, and seam sealing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Rubber compounders rely on UV-531 to extend color stability, tensile strength, and serviceable age of styrene-butadiene rubber (SBR), nitrile rubber (NBR), and EPDM grades used in tires, beltings, and outdoor rubber goods. UV stabilization begins at the mixing stage, dramatically reducing surface cracking and loss of flexibility. Large tire and technical rubber goods manufacturers specify additive ratios based on end-use climate and regulatory requirements for long-term durability under sun exposure.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive UV Absorber UV-531 (RIASORB UV 531) prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618105193818 or mail to sales11@bouling-chem.com.
We will respond to you as soon as possible.
Tel: +8618105193818
Email: sales11@bouling-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Every day in our facility, teams manage schedules around making UV-531, otherwise called RIASORB UV 531. The process isn’t just mixing powders or running reactors for the sake of producing bulk chemicals. When developing and scaling up production of this benzophenone-based UV absorber, plenty of small decisions come up—from how the raw materials arrive and blend, down to how we dry, filter, and package the end product. We put real hands and years of chemist sweat into getting every batch near colorless and stable, targeting a typical melting point around 47-49°C. Attention to detail at this stage doesn’t just serve a checklist; it means customers aren’t left fighting haze or color shift and don’t get stung by quality drift down the line.
Outdoor exposure pushes plastics to the limit. Mid-summer, surface temperatures on car panels or lawn furniture can soar, and sunlight starts chipping away at polymer chains. The slow, silent spread of yellowing and brittleness isn’t a mystery from a chemistry perspective: it’s ultraviolet light breaking down bonds, particle by particle.
Our UV-531 has been developed and tweaked over the years by people who have watched thousands of tons of plastics pass through extruders and injection molding presses. We have worked with processors who told us their films need predictable melt flow the whole way. They want a powder or flakes they can shovel and dose without clumping, and more importantly, they are chasing a cost-effective way to shield polypropylene or polystyrene from sunlight.
Each granule or flake contains a specific molecular structure—2-hydroxy-4-n-octyloxybenzophenone—crafted for absorbing UV-B and part of UV-A light. That molecular detail gets glossed over on paper, but in practice, it means many customers pick UV-531 over alternatives because it doesn’t color their finished products as quickly as other benzophenones or phenolic types.
We've seen demand for UV-531 track with growth in commodity plastics—polyethylene, polypropylene, polystyrene—used in everything from outdoor cases for power tools to the milk jugs resting in grocery coolers. Injection molders seek a familiar recipe, not an experiment with unpredictable migration or interaction with stabilizers. UV-531 fits because it slips easily into resins at standard dosages, delivering reliable persistence against sunlight without shaking up processing temperatures or attracting strange odors in the final goods.
Some processors try swapping in alternative UV absorbers hoping for lower price tags or lower dosage points. From our vantage point across three decades of chemical production, UV-531 delivers an uncommon blend of low volatility and good compatibility with polyolefins. Drop-in alternatives, especially triazine and benzotriazole-based absorbers, sometimes cause issues like migration or exudation. Our lab has run tests where benzotriazole types show high UV cut-off, but at the cost of more material leaching to product surfaces over time, raising compliance and shelf-life headaches for end users.
Production managers want to know what makes a UV absorber dependable under the press or in the field. The published numbers only mean something because repeated batches show stability from end to end. From our side, UV-531 comes out as a light yellow crystalline powder or flakes, nearly insoluble in water and soluble in organic solvents. That insolubility prevents unwanted migration, so customers won’t worry about the chemical bleeding out of a finished product exposed to rain or sweat.
It’s not just the composition or appearance that matters; content and purity make or break applications. The spectroscopic purity gets checked every run to assure customers they’re not loading up on unknown byproducts that could darken their plastic over months. Some competitors take shortcuts, loading stabilizer packages with cheaper filler or different ratios of UV absorbers—this can swing performance in unpredictable ways. By keeping the loss on drying low, our batches help customers avoid batch rejection and color shifts during processing.
Plastic manufacturers call us for guidance about using UV-531 in extruders, blow molders, or as a masterbatch additive. The mainstay is thermoplastics—household goods, garden furniture, automotive trims—where long hours under the sun punish unprotected articles. Customers handling transparent films or sheets appreciate that UV-531 can protect underlying pigment stability and clarity, even in thin gauges.
We’ve collaborated with compounders who need to adjust dosing higher in filled or pigmented systems, but too much—over 1% by weight—can cause blooming on surfaces, especially under certain climate conditions. Based on hands-on work with downstream processors, we recommend levels between 0.1% and 0.5% for most outdoor durable goods. Anyone loading more is usually fighting a problem upstream in their formulation or chasing UV result numbers without balancing cost.
Some plasticizers and flame retardants can interact with UV absorbers. Through routine factory trials, we’ve seen how compound stability sometimes drops if certain antistatic agents line up with UV-531. In every case where trouble cropped up, our troubleshooting involved tweaking the stabilizer mix or changing the compounding sequence. In all these cases, our decades of lab and production experience give practical troubleshooting advice, not just a printed spec sheet.
Plastics companies experimenting with product lines often sample stabilizers side by side. While triazine and benzotriazole families rise in popularity, we often hear complaints about handling difficulties or high temperature instability. For manufacturers running high-temperature resins or requiring maximum resistance against yellowing in transparent applications, those alternatives play a role, but they come with steeper costs and a smaller window between effective dose and migration risk.
Over time, old-school benzophenones like UV-531 remain a staple for their middle-ground properties: broad compatibility, a gentle impact on color, and a reasonable price point that lines up with high-throughput process economics. Our production teams analyze melt flow compatibility and volatility closely; batch-to-batch comparisons show UV-531 behaves as expected across basic polyolefins and polystyrene.
Clients sometimes ask if UV-531 stands up in engineering plastics like polycarbonate or co-polyester. Based on our trials and customer feedback, we flag that migration or color shifts can occur at higher processing temperatures or in thin films needing extended UV protection. For those markets, we point them toward specialty absorbers built with higher molecular weight or triazine core, which offer better permanence.
We hear from partners in packaging, construction, and automotive supply chains. Moisture doesn’t phase UV-531 in outdoor decking, plastic fencing, or automotive weatherstrips. The UV resistance curve matches up well with project expectations set by years in field trials around the world. In films and fiber applications, dosing levels stay effective within a moderate window—overloading results in diminishing returns, which our R&D team has demonstrated in controlled sunlight tests.
We also help customers chasing clarity in transparent containers and films. Some UV absorbers throw a yellow cast or reduce visible light transmission. UV-531’s molecular structure avoids heavy coloring at standard loads, a fact clear to anyone comparing sheets side by side coming off the line. In garden products, poolsides, and food trays facing months of sunlight, manufacturers trust that the clarity and texture remain steady.
Regulations evolve, and production methods shift. Over two decades, we have adapted UV-531 batches to meet stricter migration limits in toys and consumer goods, ensuring global shipment approvals. We comply with regulatory requirements for ROHS and REACH, not because guidelines say so, but to meet downstream auditors’ expectations. Any queries on impurities or residual solvents are answered with clear documentation and test results drawn from our actual QA system.
We help compounders keep up with rising demand for recycled content in plastics as well. Processing recycled streams means dealing with more impurities and batch variation. UV-531’s consistency keeps stabilizer blends predictable, allowing operators to spend less time rebalancing additive loads batch by batch. Processors running post-consumer polypropylene or polyethylene detect fewer surprises when taking UV-531 into their standard recipes.
Our standard packaging is more than a cost line on a sheet. Bags and drums protect the stabilizer from moisture pickup during shipping and storage. We watch warehouse conditions and cycle inventory so shipment quality doesn’t slip—a lesson learned after field returns in climates with high humidity. Every shift takes pride in knowing end users won’t fight caked powders or opened containers on arrival. QC teams test every shipment for content, melting range, and volatiles, keeping out of spec material away from our partners’ lines.
Occasionally, knowledge from front-line production improves the product in ways unseen on paper. In the past, we altered the post-treatment step to tighten the particle distribution, which produced a marked improvement in feeding performance, particularly in automated compounding lines with gravimetric dosing. These process tweaks come only after hands-on experience and customer feedback, not top-down guesswork or off-the-shelf repackaging.
We do not rest on familiar ground simply because the product serves many applications reliably. Collaborating with universities and polymer scientists, we keep evaluating improved variants and mixing protocols. Our R&D team screens co-stabilizer blends with UV-531, investigating better overall performance in weathering and extended shelf life. This way, our users benefit from both established reliability and progress, not just lab promises but field-tested improvements.
Quality assurance pulls from our own data backlog, not just from third-party certifications. Repeat buyers treat our stability claims as more than just paperwork—our record stands on decades of consistent performance. Customer audits sometimes involve line walks and witnessing live production; nothing brings trust like open doors.
Raw material costs and supply volatility remain perennial issues in the chemical sector, and we carry buffer inventory to ensure reliable product availability. We do not rely solely on vendor sources; our procurement group qualifies multiple sources for key intermediates so downstream lines do not freeze up due to market quirks. We share delivery expectations openly and can flex batch sizes for consistent partners because we know lost shifts on their floor mean more pain than just one missed truck.
Technical teams actively guide customers through processing modifications during product changes or plant upgrades. If a new molder upgrades to higher shear or temperature settings, technical meetings sort through dosing and timing, making sure UV-531 releases into the melt in sync with masterbatch and pigment carriers. We stand by our customers before and after each shipment, favoring problem-solving over templated after-sales responses.
Distributors and traders report trends, but first-hand observations at customer factories reveal what really matters. One garden tool manufacturer told us about colored streaking tied to excessive stabilizer in a compounded blend; our follow-up revealed that correction lay in the drying and feeding sequence, not in switching additives. Experience at the compounding line trumps specification sheets every time. We fix dosing or application issues directly, sometimes visiting production lines or setting up online calls with operators facing downtime or color problems.
Another processor in the packaging industry counted on fast transition to new recycled polyolefin blends, but found increased yellowing. We identified raw material impurity as the source, adjusting UV absorber dosing and compounding temperature; the problem faded, saving both labor and waste.
Polymer science doesn’t stand still. Every year, markets push for lighter, stronger, and longer-lasting plastics. UV-531 supports manufacturers that value predictable protection for standard resin streams and require balanced performance at scale.
Many plants keep multiple UV stabilizer grades in inventory, but UV-531 remains a frequent building-block choice because operators know it runs well, backs up regulatory needs, and doesn’t force plant managers into unplanned retooling. Flexibility in the shop and years of proven field use keep it relevant for both high-volume and specialty sheet, film, and injection goods.
Old and new customers alike mention the same qualities: consistent melt processing, broad compatibility, clean handling, and proven longevity outdoors. People want a stabilizer that guards against costly failures. We stand behind our UV-531 because it has delivered on these demands for years in the toughest real-world environments.
Few chemical additives last decades in widespread use without delivering results at the customer level. Our experience producing, customizing, and delivering UV-531 builds trust—not through filler claims but through direct engagement and honest troubleshooting. People make the difference, both in the plant and throughout our supply chain, ensuring that each shipment supports the integrity and creativity of manufacturers worldwide.
Get in touch with our team to discuss your chemical product requirements, request samples, or explore how we can support your business with tailored solutions.