| HS Code | 944649 |
| Product Name | BPF-805 PV Backsheet |
| Type | Photovoltaic Backsheet |
| Total Thickness | 305 μm |
| Color | White |
| Outer Layer Material | Polyvinylidene Fluoride (PVDF) |
| Core Layer Material | Polyethylene Terephthalate (PET) |
| Innermost Layer Material | Fluorinated Polymer |
| Tensile Strength | >120 MPa |
| Water Vapor Transmission Rate | <1.5 g/m2/day |
| Uv Resistance | Excellent |
| Operating Temperature Range | -40°C to +85°C |
As an accredited BPF-805 PV Backsheet factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The BPF-805 PV Backsheet is packaged in rolls, each roll containing 100 meters, securely wrapped and labeled for protection and identification. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): BPF-805 PV Backsheet is securely packed, maximizing container space, ensuring safe, efficient, and contamination-free transport. |
| Shipping | The BPF-805 PV Backsheet is securely packaged in rolls, each protected with moisture-resistant wrapping and placed in reinforced cartons or wooden pallets. Shipments are dispatched via road, sea, or air freight, ensuring compliance with safety and handling regulations. All packages include clear labeling and documentation for safe and efficient delivery. |
| Storage | BPF-805 PV Backsheet should be stored indoors in a cool, dry, and well-ventilated area, away from direct sunlight, moisture, and sources of heat. Rolls should be kept in their original packaging on a flat surface to prevent deformation. Avoid stacking heavy materials on top, and protect from sharp objects to prevent puncturing or tearing of the backsheet material. |
| Shelf Life | BPF-805 PV Backsheet has a typical shelf life of 12 months when stored in cool, dry conditions in original packaging. |
BPF-805 PV Backsheet is formulated for the manufacturing of photovoltaic module backsheets, enabling durable protection and electrical insulation across solar power, renewable energy component, and specialty film industries. Listed below are the core industrial application routes based on customer integration scenarios. Each section addresses the direct technical and regulatory requirements unique to the respective manufacturing sector.
Photovoltaic module manufacturers adopt BPF-805 in the structure of multi-layer backsheets for crystalline silicon solar panels, which require long-term outdoor endurance, dielectric reliability, and yellowing resistance. Process engineers optimize the PVDF and PET layer ratios during sheet extrusion and lamination, ensuring alignment with IEC standards for field durability and electrical safety. Additive percentages depend on the required thickness, UV exposure rating, and cell design used by OEMs. This segment applies to solar module lines using automated lamination, vacuum pressing, and high-throughput laser patterning technologies for mass production.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Flexible photovoltaic module assemblers require sheets with outstanding flexibility, hydrolytic resistance, and stable thermal performance. Producers incorporate BPF-805 to achieve consistent adhesion in multi-layer protection structures, crucial for thin-film modules that endure repeated mechanical flexing and harsh environmental conditions. Formulation ratios vary depending on application thickness and the number of encapsulation layers, as well as film elongation targets set by the developer.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Emerging bifacial module production lines require low-absorption backsheets to permit reflected light onto solar cells while maintaining mechanical insulation and high weather resistance. R&D teams have validated BPF-805 for transparent and translucent backsheet applications, enabling rear-side generation without compromising module longevity. Usage ratios reflect innovation in backsheet thickness and UV-transparent formulations, which downstream operators continuously adjust by real-time inline spectrophotometry.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of BIPV elements, such as solar roof shingles and façade panels, incorporate BPF-805 to achieve form stability, UV resistance, and robust moisture barriers in finished laminates. This application emphasizes architectural compliance and strict material traceability. Additive proportions reflect the bespoke nature of BIPV designs, varying with color-imparting additives and fire retardancy requirements articulated by building codes in different geographies.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Specialty PV device assemblers rely on BPF-805 for producing tough, weatherproof encapsulation backsheets tailored to remote telecommunications, monitoring equipment, and field-deployed energy solutions. Material inputs must hold up under drastic temperature swings and sustained moisture exposure, with formulation percentiles balanced around device weight limits and long-term reliability goals outlined by application engineers.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive BPF-805 PV Backsheet prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618105193818 or mail to sales11@bouling-chem.com.
We will respond to you as soon as possible.
Tel: +8618105193818
Email: sales11@bouling-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Every day on the production floor brings another new set of panels past the inspection lamps. Each one needs reliable, robust backing. We have walked this path for decades: testing materials, watching the weathering chambers work their slow magic, following modules from sun-scorched rooftops in Rajasthan to wind-blasted test fields in Norway. We have seen the fallout when backsheet layers break down, and the long rows of modules gathering dust because a failure in protection led to power loss or even dangerous breakdowns. We learned early that not every backsheet stands up equally to the challenge of high UV, creeping moisture, and constant temperature swings. This is where the BPF-805 PV Backsheet comes into focus—built from the ground up inside our own facilities, tuned through years of field feedback and laboratory grit.
Most backsheet products look similar at first glance: a white or sometimes black rear layer, fused or laminated, a sandwich of polymers. But differences emerge on the lines. With the BPF-805, we start from a high-grade PET core, using no fillers that can degrade under heat. Each roll faces batch-testing for shrinkage and elongation under sustained 85°C conditions, not just a few hours but for well over a week. The top fluoropolymer layer is pressed right here—never outsourced. We monitor gloss, thickness, and surface tension, knowing that dust pick-up or ink-bleeding tells us more than a shipping specification ever could.
The BPF-805 offers a film thickness tailored to the most requested 300~380 micron range. That thickness isn’t arbitrary; over a decade of breakage data revealed that modules with thinner layers develop micro-cracks around the edge paste, opening paths for encapsulant yellowing and corrosion. Our lamination lines take BPF-805 easily, laying flat and withstanding both rapid and slow press cycles. Tighter process controls bring better adhesion to encapsulant sheets—no delamination, no bubbling under thermal cycling, even on older foil-laminated module designs.
It’s more than the sum of layers. Real-world exposure provides the toughest standards. Our test farm in Yunnan has seen morning frost and monsoon rain. The BPF-805 holds under both. Extensive damp heat and UV exposure cycles give us hard facts—over 99% reflectance retention after 2000 hours in humid ovens, with insulation resistance that doesn’t dip below safety limits. In open-rack tests, BPF-805 shields cells from PID (potential-induced degradation) by holding the system voltage, without early breakdown or corona discharges at the junction box welds.
We engineer every roll with a fluorinated outer layer for aggressive environments—ammonia from livestock rooftops won’t soften it, nor will salt spray from coastal installations. We do not compromise on polymer purity. That means fewer batch-to-batch color shifts, and every inspection round finds minimal gloss drop over years of highway-grade sunlight.
Years ago, module builders came to us with sheets clouded, corners yellowing, and edges peeling from other backsheet films. Lower cost often means lower life: calcium carbonate filler crackles under pressure, replaced by better core PET in our process. We heard complaints of delamination where edge-glued sheets couldn’t keep out the rain, or glue lines splintered at panel corners. BPF-805 uses direct extrusion—layers fused, not glued. This prevents water creep between layers, even after 3000 hours in accelerated aging huts. Other backsheets may stratify or bubble under solder-point heating; these issues do not pass our internal checks.
Tracking failure modes led us to realign the product long before industry standards called for more. Lower tier films cut costs by reducing core PET thickness or skipping fluoropolymer. We maintained target thickness, kept the fluoropolymer face shield, and rejected recycled content for all exposed layers. That choice doesn’t come lightly—panel warranty costs cut both ways. Downtime for cleaning or repairs eats margins for field installers and plant operators. We worked with line engineers to tune lamination temperature points for BPF-805, adjusting adhesive formulations only once real-world peel strengths exceeded our threshold.
Other products on the market drift in color consistency, sometimes turning chalky beneath raised glass panels or under snow build-up. BPF-805 conserves whiteness, which means greater lifetime albedo boost—five percent or more power retention in aged bifacial module setups. We’ve examined modules after extensive IEC batch rounds and after ten-year field recoveries; the model’s resistance to creeping, edge darkening, and loss of tracking marks stands up better than earlier PET or pvf blends. These are not just laboratory observations but modules we brought back, dissected, and peeled layer by layer on our own floor.
Downtime and service calls usually tie back to failures in the cell stack enclosure. Moisture traces the easiest path in, often finding the backsheet seam long before eating through thick edge potting. BPF-805’s controlled moisture permeability seals the entry point, with values measured at less than 1.2 g/m²/day under 85°C/85%RH—benchmarked against alternative backsheet models averaging closer to double that rate. We pulled sections from installations exposed in wet, fog-rich environments; the difference in EVA browning and busbar corrosion remains clear after five years’ service. In storm-worn commercial setups, panels fixed with the BPF-805 carried on, while some alternatives would show even minor curling and start to lift at the corners, inviting dust and water entry.
PID failure modes have forced a hard look at insulation breakdown over extended field life. Where others report creeping failures after just three years, BPF-805 maintains high insulation values, reducing site shutdowns and the frequent recalibration headaches. Direct overlay lamination, without glue lines, closes off micro-pathways for voltage leaks. That reliability does more than keep modules running—it preserves project ROI five or ten years out, particularly on multi-megawatt solar farms where truck rolls and labor come at a premium.
Our technicians assemble modules on continuous lines, handling several thousand square meters per day. Every time we update a backsheet, their input steers further improvements. BPF-805 scored highest for lay-flat performance—no edge curl, no wrinkling even after unrolling 700+ meter-long spools. A stiff, even surface reduces stop time on automated lines and brings fewer rejects per shift, especially crucial as module sizes grow heavier and glass thickness climbs toward 2.0 mm and above.
BPF-805 bonds evenly with both older EVA and modern POE encapsulants. In frame rate testing, peel strength holds well above six newtons per centimeter after extended damp heat cycles. The result is fewer scrap panels, lower maintenance calls, and less downtime linked to lamination faults. Our in-house QA teams check each batch for tear propagation; BPF-805 resists splitting and edge tearing, even after deep score cuts from old reel spindles or during quick cycling on rebuilt presses.
The push toward thinner, higher efficiency cells brings a set of new stresses for any backsheet. N-type, shingled, and heterojunction cell designs place added thermal stress at the solder joints and along module edges. BPF-805 serves well across these newer architectures, keeping out water wicking and holding shape during thermal cycling from below -40°C up past 85°C. As module voltages increase, flash testing and real-world insulation checks separate the best from the rest. BPF-805 repeatedly posts high breakdown voltages, above industry minimums—making it trusted on both smaller rooftop units and in high-voltage utility-scale builds.
As cells thin out—falling far below 180 microns—mechanical stability and support matter more. We trialed BPF-805 in pilot runs with next-gen half-cell and bifacial designs, using both aluminum and plastic frames. UV stability and reflectance outperform many legacy backsheet constructions, especially where increased rear-side power capture becomes a selling point. After three summers of field exposure, bifacial module operators running BPF-805 backed panels have reported lower annual power loss rates and fewer return visits linked to weathering faults.
Rework and returns eat into margin like little else. Every backsheet failure comes back to us as a learning opportunity. During summer monsoon months, high field humidity subjects modules to accelerated aging, pushing backing sheets to the limit. Last year, panels running BPF-805 saw considerably fewer failures due to hydrolysis and delamination than modules built with foamed or hybrid sheet alternatives. Service crews in desert environments also noted reduced backside dirt adhesion, easing panel cleaning and keeping DC power output up without resorting to aggressive washes or downtime-prone maintenance.
BPF-805’s reliable peel strength and dimensional stability keep modules rolling through finishing steps without stop-and-start or costly redo cycles. We see it reflected in our own throughput statistics: fewer jams, tighter line yields, improved batch consistency. We track everything—ink adhesion, surface scratch resistance, weathering shifts in real time. Whenever we hand off a shipment of BPF-805 backed panels, we carry confidence into the field—hard-earned over many years, supported by our close partnerships with major module brands, and cemented by hundreds of megawatts standing in real-world sites.
New regulatory pushes demand more from every component in a solar module. End-of-life handling and recyclability get more attention, especially as national standards shift toward stricter fire ratings, ROHS compliance, and landfill restrictions. Our internal R&D teams crafted BPF-805 using cleaner, halogen-free base polymers and solvent-free extrusion steps. This means a lower environmental burden during both production and disposal. BPF-805 passes IEC 61730 fire and high-voltage isolation tests, and does not leach problematic substances—helping downstream customers navigate both export controls and local installation codes, especially in major projects built on public land or with government funding support.
We have worked directly with recycling partners to make separation faster and safer. Thermal delamination tests confirm that BPF-805’s layer structure comes apart under industry-standard recycling streams, simplifying panel take-back and recovery plans. In regions locking down on landfill dumping, panels built with BPF-805 ease the path toward sustainable cradle-to-cradle approaches. Our choice to avoid recycled content in new product—while accepting post-process scrap from our own line—balances quality control with responsible waste reduction, from the roll plant to the recycler’s doors.
Our labs and test arrays keep up with evolving module technologies—glass-glass, transparent, lightweight, double-glass, and more. Each configuration demands careful matching between backsheet flexibility and rigidity, reflectance, and thermal expansion. BPF-805 fits the needs of today’s standard glass-back modules, and we keep iterating for emerging formats. As cell manufacturers drop lead and silver content, backsheet interaction with alternate pastes (like copper or nickel) rises in importance. We test every new chemistry for bonding, color shift, and chemical resistance in our own pilot lines before clearing BPF-805 for broader production.
Customer feedback matters. Installers in Southeast Asia, where rooftop exposure amplifies humidity and temperature cycling, report less edge-seal breakdown with BPF-805 than other brands. EPCs running large arrays in North Africa and the Middle East see the same resistance to dust pitting, while plant operators in harsher Scandinavian environments cite BPF-805’s flexibility in sub-zero conditions, with no winter cracking or cold embrittlement. Our open-door policy means anyone—field technician, QA inspector, or production line manager—can walk up, try out a new idea, or request broader pilot runs for unseen conditions. We bring every lesson back to the main line, always pushing for a better, tougher, longer-lasting backsheet for the gigawatt-scale transition to clean power.
We learned as much from module makers and their field crews as we have from our own test yards. A backsheet rarely fails in isolation; it’s always part of a full system—glass, cells, encapsulant, frame, junction box, every detail counting. With BPF-805, we share breakdown investigations, run joint workshops when a new fault emerges, and stay present when a utility site needs quick support. We have sent technical teams to inspect failed panels in the mountains, city rooftops, floating installations, and tracked desert sites. In nearly every climate, our product keeps modules powered through years of intense weather, risk, and ever-changing tariff lists. This level of shared responsibility—designer, assembler, installer, and operator all at one table—is how BPF-805 grew from a candidate in the lab to a mainstay at utility and commercial sites around the world.
Trials continue year-round. The next generation of solar includes thinner modules, higher voltages, tougher insulation requirements, and ever-tighter cost constraints. Each iteration of the BPF-805 leverages field failures as much as clean test passes. Data from every repair ticket, every module return, every megawatt deployed feeds back to our material design cycle. We stand behind the backsheet with clear data—thermal cycling, damp heat, UV, salt spray, ammonia resistance—all mirrored against our latest batches. With the world leaning further into renewables and solar expanding into new geographies—from high-altitude Andes to Nile Delta fisheries—the pressure on every component grows. We keep up by listening, remaking, and, above all, refusing to release any roll that doesn’t live up to our long-held standards for durability and reliability.
BPF-805 sets its difference not by press release or price war, but by the years of clean performance out in the field, where module owners count every watt and every season’s survival. We build not just for one line or one contract, but for the long haul—learning, adapting, and always placing field performance at the core of every batch we make. That is the path we believe in for backsheet manufacture, one grounded in real-world use and relentless, hands-on improvement.
Get in touch with our team to discuss your chemical product requirements, request samples, or explore how we can support your business with tailored solutions.