| HS Code | 364776 |
| Product Name | HC806 Light Conversion Film |
| Type | Light Conversion Film |
| Transmittance | Above 85% |
| Thickness | Approximately 80μm |
| Width | Standard 1.2 meters |
| Length | Customizable |
| Main Material | Polyester base |
| Light Conversion Rate | Above 60% |
| Application | Agricultural greenhouse covering |
| Service Life | 3-5 years |
| Uv Resistance | Yes |
| Color | Slightly milky transparent |
| Storage Temperature | 5°C - 35°C |
| Installation Method | Surface adhesion or lamination |
| Wavelength Conversion Range | UV to visible light |
As an accredited HC806 Light Conversion Film factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | HC806 Light Conversion Film is packaged in rolls, each containing 50 meters, sealed in a protective, moisture-proof plastic wrap. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for HC806 Light Conversion Film: 6-8 metric tons, securely packed on pallets, moisture-resistant, optimized for space efficiency. |
| Shipping | HC806 Light Conversion Film is shipped in secure, moisture-proof packaging to prevent damage during transit. Each roll is carefully wrapped and boxed to maintain its integrity and ensure safe delivery. Temperature and handling guidelines are observed to preserve the film’s quality, meeting international shipping standards for specialty chemicals. |
| Storage | HC806 Light Conversion Film should be stored in a cool, dry, and well-ventilated area away from direct sunlight and heat sources. Keep the film in its original packaging until use, and avoid exposure to moisture and corrosive substances. For optimal performance, maintain storage temperatures between 10°C and 30°C, and humidity below 60%. Handle with clean gloves to prevent contamination. |
| Shelf Life | The shelf life of HC806 Light Conversion Film is 12 months when stored unopened in a cool, dry, and ventilated environment. |
HC806 Light Conversion Film delivers targeted spectral conversion for diverse manufacturing sectors, enabling increased efficiency and product performance in downstream applications where precise light management is critical. Our direct integration with industrial partners ensures transparent traceability and process data to support the manufacturer’s scale-up and regulatory requirements.
Leading greenhouse manufacturers adopt HC806 for advanced diffusive roof and wall coverings, where precise conversion of UV and blue light into photosynthetically active red wavelengths supports enhanced crop yield and energy management. Integration starts during extrusion or lamination of PE, PET, or EVA-based films, with exact polymer blend selection driven by crop type, local light conditions, and regional standards for photoselective films.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
HC806 enhances light management within PV module stacks, serving as an interlayer or cover film that converts underutilized short-wavelength light into longer wavelengths for improved photoelectric response. Key manufacturers employ it during lamination processes for crystalline silicon and emerging thin-film applications, focusing on compatibility with PET/EVA encapsulants and strict material durability protocols.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Major horticultural suppliers use HC806 to fabricate light conversion shields, panels, and tapes within environments requiring artificial grow lighting. Spectral tuning allows for the conversion of blue or UV-rich LED, HPS, or fluorescent sources into red and far-red regions, with key process positions in panel molding and co-pressing with acrylic or polycarbonate substrates, maintaining emission stability during repeated sterilization cycles and cleaning.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Aquaculture integrators select HC806-based films for tank and outdoor pond covers, optimizing ambient light spectra to accelerate phytoplankton growth and fish health, especially in dense recirculating systems. Integration requires strict environmental resistance and bio-compatibility. HC806 enters through film formation for floating covers or fixed canopies, where direct sunlight spectral modification promotes production efficiency without disrupting water chemistry standards.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of closed-loop photobioreactors for algae and microalgae utilize HC806 to boost photosynthetic efficiency in tubular and panel reactors. The integrated film serves as a light conversion lining or sheath, inserted during the reactor assembly for optimal wavelength management. The process requires stability under continuous light and chemical exposure, meeting stringent contamination control and optical transmittance criteria enforced in algae biotech production.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive HC806 Light Conversion Film prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618105193818 or mail to sales11@bouling-chem.com.
We will respond to you as soon as possible.
Tel: +8618105193818
Email: sales11@bouling-chem.com
Flexible payment, competitive price, premium service - Inquire now!
For decades in the film manufacturing business, we watched growers of fruits, vegetables, and ornamental plants face tough bottlenecks as they battled with greenhouse climate and lighting. The light streaming through plastic film changes everything about how well a crop comes along, from leaf color to pollination. Maximizing every photon often makes the difference between meeting yield targets and falling short. Our team has focused on one question: how can we design a film that puts photobiology into the hands of the grower without adding more workload or demanding new infrastructure? Enter HC806 Light Conversion Film.
Conventional PE greenhouse films still dominate. Each year, millions of square meters of standard films cover Chinese tomato tunnels, European strawberry houses, North African pepper strongholds. The main task of regular films? Roof and wall, block out hail or dust, let sunlight through. But these films mostly ignore the needs of plants. The sun’s light spectrum comes packed with wavelengths that play different roles inside the leaf: blue for robust seedlings, red for flowering, far-red for stretching stems, and UV that can stress but also stimulate. If a film lets in only what’s easy to see, growers accept wasted growing potential.
Our lab’s work focuses on photoconversion. This starts by asking which solar wavelengths crops use best, and how to shift less useful rays into the spectrum where plants work hardest. Instead of simply passing sunlight, we target the balance of red, blue, far-red, and UV, using real-world greenhouse results as our feedback, not only theoretical models. This hands-on feedback loop led our engineers, film extrusion specialists, and plant scientists to develop the HC806.
HC806 moves away from the basic mantra of “more light equals better yield.” In greenhouses, quality matters far more than just quantity. Photosynthetically active radiation (PAR, 400–700 nm) forms the backbone for growth and carbohydrate production, but plants do not treat all PAR the same. Too many blue or UV wavelengths bring tougher, smaller leaves but can suppress overall growth. On cloudy days, too little red hinders fruit set, while overcast climates challenge early flowering.
Our light conversion formula inside HC806 doesn’t just scatter or diffuse light; it transforms incoming sunlight by capturing less productive, high-energy UV and violet photons and re-emitting them in targeted orange-red regions used most efficiently in photosynthesis, particularly around 600–700 nm. In field trials with tomato, strawberry, and cucumber, this meant fruit maturation came faster under HC806, with better color and heavier weight per square meter compared to traditional films. Our customers shared feedback showing thicker fruit skin in tomato—which withstands shipping bruises better—plus shorter crop cycles, up to 10 days faster to mature harvests.
Simplifying greenhouse operations remains central to what we do as a chemical film manufacturer. Complicated installations, short film life, or unpredictable degradation drive up costs, time, and risks for growers. The film’s core polymer structure uses high-clarity PE with tightly bound conversion agents so there’s no powdering, leaching, or uneven color change over time. Instead of losing its benefit after a summer, HC806 keeps its light-shifting properties stable for multiple seasons, under real-world sun and wind.
HC806 comes in a variety of standard thicknesses—from 80 microns for single-layer tunnels, to reinforced 200 micron models for harsh wind belts or hail-prone regions. The strength was field-proven in several industrial-scale berry houses, where post-storm inspection saw no cracking or UV yellowing, even after three years in place. So the focus moves from patching rips to thinking more deeply about how growing conditions drive returns.
A big part of our process involves working shoulder-to-shoulder with professional crop managers. One example stands out: in a central Hebei tomato complex, growers faced persistent losses each spring due to late fruiting. After moving to HC806 and mapping the early spring daily light spectrum, the change was clear. Plants set fruit 8 days sooner, with less blossom drop. The greenhouse team later connected this outcome to the film’s increase in photosynthetic photon flux density (PPFD) in the 650 nm range—where tomato floral organs respond most.
Cucumber growers in Sicily highlighted another advantage of HC806. Local aphid outbreaks, often triggered by excessive heat or UV stress, receded after the new film installation. Independent extension agents confirmed the HC806 trial houses had measurably lower near-UV levels, which research shows helps lower insect stress on tender crops. These growers also told us the handled rolls—that run up to 12 meters wide—fit their existing structures with no retrofitting.
Ten years ago, most greenhouse films focused only on keeping UV out and light in. With HC806, the conversation changes. Basic clear PE or PVC lets 85–90 percent of sunlight pass, but that sunlight doesn’t match what the crop needs most. Some next-generation diffusing films do a little better by scattering light, which reduces shadowing and keeps leaf temperature down. Yet very few films truly upgrade the actual spectrum—transforming unhelpful UV or violet into extra fuel for the plant.
What makes HC806 stand out is its precise light conversion function. Competitor “red films” tint the light but rely on simple dyes, which fade and sometimes filter out too much blue, hurting plant vigor. The proprietary photoluminescent agents in HC806 remain stable across full seasons, as shown in third-party spectroradiometric tests.
Specialized diffusing films promise more even canopy illumination, but on-site measurements at cucumber operations in southern China pointed out the limits: these films did little to boost core red or orange light delivery, and fruit set gains trailed the HC806 trials by as much as 15 percent. HC806 also beats out pure UV-blocking films for growers focusing on insect management, because the unique light shift not only cuts harmful UV but actively boosts red-oranges, discouraging thrip and whitefly outbreaks along with better fruit finish.
Crop scientists ask us for evidence, not claims. We provide detailed PPFD spectrometry, showing that HC806 increases red/orange output by 6 to 12 percent, depending on solar angle and sky clarity, compared to generic clear films. At the same time, UV-A content at canopy drops by at least 50 percent—verified in both spring and mid-summer solar tracking. This spectrum shift correlates to better fruit coloring, more uniform ripening, and lower heat stress. On-site chlorophyll fluorescence imaging documents up to 9 percent boost in daily photosynthetic rates versus legacy PE.
Biosafety always sits in the spotlight for new chemical film technologies. The conversion agents inside HC806 are locked into the film matrix, so there’s no leaching to soil or condensation droplets. We designed the film’s outer layer to withstand acid rain, ammonia mist, and even routine contact with diluted pesticides. That’s why greenhouse inspectors in Spain and local agricultural chemists in Hokkaido both signed off on HC806 after full-cycle exposure.
Greenhouse managers now face rising running costs, unpredictable energy bills, and market pressures for higher-quality, residue-free produce. For the technical teams responsible for greenhouse P&L, switching films comes with questions about compatibility and value. We guarantee that HC806 works on existing structures, forms strong welds at all standard seam temperatures, and resists tearing at grommet and pole holds. Our in-factory QA checks look for optical uniformity and distribution of conversion agents so that every roll gives crops a consistent dose of re-tuned light across every square meter.
Cleaning routines with mild detergents, UV sterilization lamps, or common greenhouse disinfectants do not damage or accelerate aging of HC806. This extends service intervals and reduces the film waste stream, aligning with sustainability goals demanded by buyers and local regulators. Several European eco-labels have called out HC806’s ability to reduce chemical pesticide use through better insect suppression under altered UV conditions.
Growers using HC806 see impacts on more than just major vegetable crops. Rose and carnation producers in the Middle East found that petals grew with deeper coloring and longer vase life. Melon house growers in Xinjiang reported heavier sugars in early fruit, verified in laboratory Brix tests. Seedling raisers emphasize higher survival rates—likely because stronger red light promotes root vigor and earlier lignification.
On-site surveys show that technical staff switching to HC806 spend less time managing crop stresses linked to sunlight quality, from tip burn to fruit splitting. Customer records display an 11 percent yield bump in spring celery, and strawberry growers collected up to two extra flushes before replanting, pointing directly to the modified spectral environment.
Mechanical reliability, photo-stability, and environmental safety represent major pressure points in the greenhouse film world. Films that yellow or crack after a single cycle create triple costs from labor, lost production, and landfill. Poorly-engineered photoconversion films can release agents into runoff or fail to deliver claimed light shifts. We targeted these issues head-on with multi-axis in-factory stress cycling, using real-world humidity and acid/alkali mist to push the limits. The multi-layer arrangement—clear on the outer face and conversion core inside—keeps agents locked in and delivers predictable spectral output from month to month.
In direct discussions with partners in the Netherlands and southern Chile, we also listened to what field technicians wanted: lightweight rolls for easy deployment, fewer seams, and recycling-compatible polymer structures. HC806 addresses these points by blending core polymer streams in a way that minimizes density range, keeps weight per roll low, and allows for mechanical recycling at end of life.
From our perspective as both chemists and agronomists, HC806 represents an important shift in greenhouse strategy. For years, growers had to balance high-yield goals against the limits of standard film design. Crop scientists proved that fine-tuned light could drive faster flowering, more compact plant architecture, and higher tomato lycopene levels, but most films lagged behind that knowledge.
HC806 closes this gap. Agronomists gain a genuine tool for plant microclimate management, with a film surface that lasts as long as the structure itself. The effect is not fleeting or cosmetic—spectrometer data collected at ongoing customer sites, year after year, show that conversion rates remain strong through seasons of rain, ice, dust, and fumigant exposure.
Today’s professional growers expect continuous access to technical support and honest results reporting, not marketing claims. Our technical teams regularly visit customer sites for on-the-ground spectrum and climate data collection, followed by periodic film health audits. Reports from berry house complexes in Poland and tomato operations in Turkey help refine every manufacturing lot, feeding a research cycle that delivers real improvements for farmers each year.
Our open-door policy invites agronomists and food company partners to review lab and field measurement protocols—chlorophyll fluorescence, leaf stomatal conductance, mechanical tensile strength, and infrared transmission at every stage of manufacturing.
All new batches of HC806 move through a triple-check system: automatic spectroradiometer testing inline, manual light-scattering evaluation, and post-extrusion durability trial on outdoor racks. This transparency earned us the trust of pioneering growers across all climate bands, from freezing winters in the Russian Far East to sub-tropical heat in southern Brazil.
Agricultural policy, consumer concern, and environmental sustainability now shape the future of greenhouse production. More regulators are phasing out short-lived, single-season films and demanding lower total greenhouse gas footprints. At the same time, growing markets for residue-free, high-antioxidant foods shift the bar for what growers have to deliver.
HC806 directly contributes to these goals through greater field lifespan, lower replacement cycles, and supporting integrated pest management. By letting growers cut chemical inputs and energy spend for supplemental lighting, the film eases the load on natural resources. Full recycling compatibility and absence of toxic outgassing help customers meet new European and Asian farm standards—all with a roll-film design suited to industry-wide equipment.
Our company’s long view has always focused on both the chemistry and the agronomy. We believe every innovation in greenhouse film must earn its place by raising crop value and supporting the grower’s day-to-day success. HC806 highlights how photoluminescent film technology—built on direct customer experience, not just lab data—can help close the yield gaps in protected cultivation.
Each season, we invest in independent field trials, run cross-continent comparisons, and invite honest grower feedback to keep refining HC806. This approach let us move from the drawing board to millions of square meters deployed worldwide, all while staying close to the real needs of our customers and the crops they nurture.
It’s clear from both data and feedback that growers won’t settle for generic films anymore. As controlled environment agriculture picks up pace, the demand for transparent, technically sound, and crop-centered films like HC806 will only grow. Our work as a manufacturer involves constant engineering and dialogue with stakeholders—from field workers, crop managers, to retail buyers.
As prospects for further innovation develop, we have our sights set on even more targeted spectrum-shifting, enhanced physical durability, and a broader crop range—from berries to leafies and beyond. With every new customer, the feedback loop grows wider, the film grows stronger, and the industry’s standards move up a notch. As the manufacturer, we’re not just watching from the sidelines—we’re on the ground, driving the change with every roll of HC806 that leaves our lines.
Get in touch with our team to discuss your chemical product requirements, request samples, or explore how we can support your business with tailored solutions.